语言

Menu
Sites
Language
flash wrong ,device died , how to fix it..

I have a RD-210 device

I flash it as follow https://wiki.tizen.org/wiki/Flash_Tizen_2.2_Image_to_Reference_Device

after I execute "lthor Tizen_RD-PQ_System_20130716_1.tar" , the device is dead.. can't start ,and Charing no response

I konw I flash with a wrong way , RD-210 Device can't flash RD-PQ , but I have done that ...

how to fix it.. please help me

 

编辑者为: Brock Boland 开 17 3月, 2014 原因: Paragraph tags added automatically from tizen_format_fix module.
列表

响应

2 回复
Peter Wegner
No idea if you have luck and Bootloader of TRATS and I9300A are "similar"... Check first with Key combo to enter Download Mode... Forgotten which... but try both, from RD-210 AND RD-PQ... Check connection with PC... because Display could be black... Ehm, I would use Windows 1 Click Thor... to check... if COM Port detected... No idea under Linux... For I9300 rumours about Bootloader restore with SD Card ... For JTAG I think you have bad cards... I have only found in FCC Pics of TRATS PCB in poor quality... No idea which processor etc and where to solder wires... So better ask Samsung, if they can repair this device, by sending back or they replace it... maybe... Best Regards
Ma

Any idea how to fix it?