sdb not detecting device

kavish

01 May 2013 21:12

To get the list all connected devices using SDB command. 1. Go to the folder \tizen-sdk\tools. And type following command. 2. Sdb devices It will give list of device attached. If you get problem to use SDB command in that case need to do troubleshooting. When You can encounter the following problems when using the Smart Development Bridge (SDB): The "no device" error is displayed when the Emulator is running. Try restarting the SDB server with the following commands: $ sdb kill-server $ sdb start-server $ sdb devices The SDB device yields the "???????? no permissions" error. Try restarting the SDB server with the following commands: $ sdb kill-server $ sudo sdb start-server $ sdb devices

Reply to this post
Mark as answer
- Report
- Edit
- Delete

John Hughes

21 May 2013 13:28

I have installed the Tizen SDK (all 1.8 gb) and I can not use the cmd prompt to access the tizen device. I have tried killing/starting/ sdb devices, and it still never finds the device. On the device, I have enabled USB debugging. I am running Windows 7 x64 and in the Device Manager it shows a not a recoginized device. Is there a driver somewhere I can download to make sdb make the computer talk to the tizen 2.0.0.a device?

Reply to this post
Mark as answer
- Report
- Edit
- Delete

kavish

22 May 2013 21:10

Are you able to see device connected in Tizen IDE ( In connection explore). If not then you have to install driver for that. If Device is detected in connection explore then you can execute sdb command. got to the tizen-sdk\tools folder and execute the command as given below: C:\tizen-sdk\tools>sdb -d shell sh-4.1$ If you use sdb devices command it will show connected device list: C:\tizen-sdk\tools>sdb devices List of devices attached 4df1080a39e39f00 device device-0 C:\tizen-sdk\tools>

Reply to this post
Mark as answer
- Report
- Edit
- Delete

akshma gandotra

22 Oct 2013 02:50

When i Run

$ sdb devices

Following error is coming:

sdb server is out of date. killing...

cannot bind 'tcp:26099'

SDB server didn't ACK
* failed to start daemon *

Reply to this post
Mark as answer
- Report
- Edit
- Delete

Pushpa G

23 Oct 2013 03:24

check this https://bugs.tizen.org/jira/i#browse/TIVI-1453

Reply to this post
Mark as answer
- Report
- Edit
- Delete

karoshi karoshi

04 Dec 2013 00:08

Dear,

I'v ported tizen ivi-panda 2.0 to pandaboard ES -omap4460.

I can boot into Tizen with error "Your Screen not support OpenGL".

I know i have to install graphic, but sdb cannot detect my board when i using 1 usb cable to connect.

Even lsusb also event show nothing.

Do you has any ideas?

Reply to this post
Mark as answer
- Report
- Edit
- Delete

karoshi karoshi karoshi karoshi

04 Dec 2013 00:31

My log :

resize2fs 1.41.9 (22-Aug-2009)
The filesystem is already 268710 blocks long. Nothing to do!

udevd[1411]: failed to execute '/sbin/blkid' '/sbin/blkid -o udev -p /dev/mmcblk0p3': No such file or directoy

e2fsck 1.41.9 (22-Aug-2009)
ums: recovering journal
udevd[1414]: failed to execute '/sbin/blkid' '/sbin/blkid -o udev -p /dev/mmcblk0p4': No such file or directoy

udevd[1416]: failed to execute '/sbin/blkid' '/sbin/blkid -o udev -p /dev/mmcblk0p4': No such file or directoy

Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
ums: 36/224000 files (2.8% non-contiguous), 21986/896512 blocks
resize /dev/mmcblk0p4
udevd[1419]: failed to execute '/sbin/blkid' '/sbin/blkid -o udev -p /dev/mmcblk0p4': No such file or directoy

resize2fs 1.41.9 (22-Aug-2009)
udevd[1421]: failed to execute '/sbin/blkid' '/sbin/blkid -o udev -p /dev/mmcblk0p4': No such file or directoy

The filesystem is already 896512 blocks long. Nothing to do!

[rc.firstboot]
udevd[1423]: failed to execute '/sbin/blkid' '/sbin/blkid -o udev -p /dev/mmcblk0p4': No such file or directoy

/sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: Read-only file system
/etc/rc.d/rc.firstboot: line 7: /bin/sysinfo: No such file or directory
ln: creating symbolic link `/opt/etc/X11/xorg.conf.d': No such file or directory
touch: cannot touch `/opt/etc/.firstboot': No such file or directory
console=ttyO2,115200n8
buddy=none
vram=16M
omapfb.mode=dvi:1280x720MR-16@60
root=/dev/mmcblk0p2
ro
rootfstype=ext4
rootwait
fixrtc
mount: mounting /dev/mmcblk0p1 on /boot failed: Invalid argument
[   12.087432] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[   12.105010] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[create base directory in /opt, /var]
[set device node perm & security]
chown: cannot access `/dev/s3c-jpg': No such file or directory
chown: cannot access `/dev/snd/pcmC0D1p': No such file or directory
chown: cannot access `/dev/snd/pcmC0D3c': No such file or directory
chown: cannot access `/dev/s3c-mfc': No such file or directory
chown: cannot access `/dev/video5': No such file or directory
chown: cannot access `/dev/video6': No such file or directory
chown: cannot access `/dev/video2': No such file or directory
chown: cannot access `/dev/video3': No such file or directory
chown: cannot access `/dev/s3c-mem': No such file or directory
chown: cannot access `/dev/radio0': No such file or directory
chown: cannot access `/sys/class/backlight/*/brightness': No such file or directory
chown: cannot access `/sys/class/leds/leds-torch/brightness': No such file or directory
chmod: cannot access `/sys/class/backlight/*/brightness': No such file or directory
chmod: cannot access `/dev/ump': No such file or directory
chmod: cannot access `/dev/mali': No such file or directory
chmod: cannot access `/dev/slp_global_lock': No such file or directory
[make gstreamer registery]
[modem power on]
ln: creating symbolic link `/modem/modem.bin': No such file or directory
/etc/rc.d/rc.sysinit: line 139: /sys/class/i2c-adapter/i2c-2/2-004a/touchstart: No such file or directory
[run profile]
/etc/rc.d/rc.sysinit: line 136: /usr/bin/xmm6262-boot: No such file or directory
debug mode enabled
Press return key to stop scripts
[   12.926116] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabld
[run all rc3 scripts]
normal boot
[/etc/rc.d/rc3.d/S02xserver start]
Starting Xorg server...
find: /etc/X11/arch-preinit.d: No such file or directory
[/etc/rc.d/rc3.d/S03sqlfs-mount start]

/etc/rc.d/rc3.d/S03sqlfs-mount: line 16: /bin/chsmack: No such file or directory
[/etc/rc.d/rc3.d/S04dbus-daemon_run start]

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.12.99.905 (1.13.0 RC 5)
Release Date: 2012-08-21
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.1.10-1.16-default armv7l SLP(Samsung Linux Platform)
Current Operating System: Linux (none) 3.4.0 #1 SMP PREEMPT Wed Dec 4 15:09:24 ICT 2013 armv7l
Kernel command line: console=ttyO2,115200n8 buddy=none vram=16M omapfb.mode=dvi:1280x720MR-16@60 root=/dev/mmc
Build Date: 26 April 2013 01:09:23AM

Current version of pixman: 0.26.0
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 1 09:15:15 2000
(++) Using config file: "/etc/X11/xorg.conf"
(++) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension X Gesture Extension
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension DRI2
[/etc/rc.d/rc3.d/S04vconf-init start]
[/etc/rc.d/rc3.d/S09alsa-init start]
rm: cannot remove `/etc/pulse/client.conf': Read-only file system
rm: cannot remove `/etc/pulse/daemon.conf': Read-only file system
rm: cannot remove `/etc/pulse/default.pa': Read-only file system
rm: cannot remove `/etc/pulse/murphy-ivi.lua': Read-only file system
xmodmap: unable to open file '/etc/X11/Xmodmap' for reading
rm: cannot remove `/etc/pulse/system.pa': Read-only file system
xmodmap: 1 error encountered, aborting.
cp: cannot remove `/etc/pulse/client.conf': Read-only file system
cp: cannot remove `/etc/pulse/daemon.conf': Read-only file system
cp: cannot remove `/etc/pulse/default.pa': Read-only file system
cp: cannot remove `/etc/pulse/murphy-ivi.lua': Read-only file system
cp: cannot remove `/etc/pulse/system.pa': Read-only file system
cp: cannot remove `/usr/etc/gst-openmax.conf': Read-only file system
cp: cannot remove `/usr/etc/mmfw_player.ini': Read-only file system
cp: cannot remove `/usr/etc/mmfw_camcorder.ini': Read-only file system
cp: cannot remove `/usr/etc/mmfw_camcorder_dev_video_pri.ini': Read-only file system
cp: cannot remove `/usr/etc/mmfw_camcorder_dev_video_sec.ini': Read-only file system
/usr/bin/xrdb: No such file or directory
/usr/bin/xrdb: can't open file '/etc/X11/Xresources'
Input Service Manager 2.3.5617

Found hardware: "PandaBoardES" "" "" "" ""
Hardware is initialized using a generic method
Launching a daemon with Socket FrontEnd...
/etc/X11/xinitrc: line 33: /etc/X11/xsetrc: No such file or directory
E - PID=1549, do_precache=0, valgrind=0
numid=7,iface=MIXER,name='DL1 Media Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=149,step=0
: values=120
| dBscale-min=-120.00dB,step=1.00dB,mute=1
numid=24,iface=MIXER,name='SDT DL Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=149,step=0
: values=120
| dBscale-min=-120.00dB,step=1.00dB,mute=1
numid=33,iface=MIXER,name='DL1 MM_EXT Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=37,iface=MIXER,name='Sidetone Mixer Playback'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=52,iface=MIXER,name='DL1 Mixer Multimedia'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=7,iface=MIXER,name='DL1 Media Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=149,step=0
: values=120
| dBscale-min=-120.00dB,step=1.00dB,mute=1
numid=24,iface=MIXER,name='SDT DL Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=149,step=0
: values=120
| dBscale-min=-120.00dB,step=1.00dB,mute=1
numid=68,iface=MIXER,name='Headset Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=15,step=0
: values=15,15
| dBscale-min=-30.00dB,step=2.00dB,mute=0
amixer: Cannot find the given element from control default

numid=37,iface=MIXER,name='Sidetone Mixer Playback'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=79,iface=MIXER,name='Headset Left Playback'
; type=ENUMERATED,access=rw------,values=1,items=3
; Item #0 'Off'
; Item #1 'HS DAC'
; Item #2 'Line-In amp'
: values=1
ESTART: 0.00000 [0.00000] - Begin Startup
numid=78,iface=MIXER,name='Headset Right Playback'
; type=ENUMERATED,access=rw------,values=1,items=3
; Item #0 'Off'
; Item #1 'HS DAC'
; Item #2 'Line-In amp'
: values=1
ESTART: 0.00571 [0.00571] - Eina Init
ESTART: 0.00650 [0.00079] - Eina Init Done
ESTART: 0.00653 [0.00003] - Determine Prefix
=================================
Enlightenment relocation handling
=================================
PREFIX: /usr
BINDIR: /usr/bin
LIBDIR: /usr/lib
DATADIR: /usr/share/enlightenment
LOCALE: /usr/share/locale
=================================
ESTART: 0.01361 [0.00708] - Determine Prefix Done
ESTART: 0.01367 [0.00006] - Environment Variables
ESTART: 0.01373 [0.00006] - Environment Variables Done
ESTART: 0.01376 [0.00003] - Parse Arguments
ESTART: 0.01382 [0.00006] - Parse Arguments Done
ESTART: 0.01385 [0.00003] - Eet Init
ESTART: 0.01401 [0.00015] - Eet Init Done
ESTART: 0.01401 [0.00000] - Ecore Init
ESTART: 0.01450 [0.00049] - Ecore Init Done
ESTART: 0.01453 [0.00003] - Ecore Event Handlers
ESTART: 0.01456 [0.00003] - Ecore Event Handlers Done
ESTART: 0.01456 [0.00000] - Ecore_File Init
numid=35,iface=MIXER,name='DL1 PDM Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
[/etc/rc.d/rc3.d/S10security-server start]
Launching a process with x11 FrontEnd...
[/etc/rc.d/rc3.d/S15snd_init start]
debug level init 1(1)
old umask was [22]
debug level init 1(1)
ALSA lib control.c:882:(snd_ctl_open_noupdate) Invalid CTL PandaBoardES
scenario: parse_card_controls: control PandaBoardES open retor: No such file or directory
ESTART: 0.16229 [0.14773] - Ecore_File Init Done
ESTART: 0.16232 [0.00003] - Ecore_Con Init
ESTART: 0.16235 [0.00003] - Ecore_Con Init Done
ESTART: 0.16235 [0.00000] - Ecore_Ipc Init
ESTART: 0.16244 [0.00009] - Ecore_Ipc Init Done
ESTART: 0.16247 [0.00003] - Ecore_X Init
ESTART: 0.18079 [0.01831] - Ecore_X Init Done
ESTART: 0.18085 [0.00006] - Ecore_IMF Init
ESTART: 0.26910 [0.08826] - Ecore_IMF Init Done
ESTART: 0.26913 [0.00003] - Ecore_Evas Init
ESTART: 0.29126 [0.02213] - Ecore_Evas Init Done
ESTART: 0.29132 [0.00006] - Ecore_Evas Engine Check
ESTART: 0.29135 [0.00003] - Ecore_Evas Engine Check Done
ESTART: 0.29138 [0.00003] - Edje Init
ESTART: 0.30478 [0.01340] - Edje Init Done
ESTART: 0.30484 [0.00006] - E Intl Init
ESTART: 0.32019 [0.01535] - E Intl Init Done
ESTART: 0.32022 [0.00003] - E_Alert Init
ESTART: 0.32025 [0.00003] - E_Alert Init Done
ESTART: 0.32025 [0.00000] - E_Xinerama Init
E17 INIT: XINERAMA SCREEN: [0], 800x600+0+0
E17 INIT: XINERAMA CHOSEN: [0], 800x600+0+0
ESTART: 0.32098 [0.00073] - E_Xinerama Init Done
ESTART: 0.32104 [0.00006] - E_Hints Init
ESTART: 0.32193 [0.00089] - E_Hints Init Done
ESTART: 0.32196 [0.00003] - E_Configure Init
ESTART: 0.32214 [0.00018] - E_Configure Init Done
ESTART: 0.32217 [0.00003] - E Directories Init
ESTART: 0.33166 [0.00949] - E Directories Init Done
ESTART: 0.33169 [0.00003] - E_Filereg Init
ESTART: 0.33765 [0.00595] - E_Filereg Init Done
ESTART: 0.33768 [0.00003] - E_Config Init
CRI<1549>:eet eet_data.c:1970 eet_data_descriptor_element_add() Preventing later buffer overrun : offset = 52s
ESTART: 0.34659 [0.00891] - E_Config Init Done
ESTART: 0.34839 [0.00180] - E_Randr Init
ESTART: 0.35284 [0.00446] - E_Randr Init Done
ESTART: 0.35287 [0.00003] - E_Env Init
ESTART: 0.35290 [0.00003] - E_Env Init Done
ESTART: 0.35293 [0.00003] - E_Scale Init
ESTART: 0.35303 [0.00009] - E_Scale Init Done
ESTART: 0.35303 [0.00000] - E_Pointer Init
ESTART: 0.35306 [0.00003] - E_Pointer Init Done
ESTART: 0.35309 [0.00003] - E Paths Init
ESTART: 0.35315 [0.00006] - E Paths Init Done
ESTART: 0.35318 [0.00003] - E_Ipc Init
INFO: E_IPC_SOCKET=/tmp/enlightenment-app/disp-:0.0-1549
ESTART: 0.35348 [0.00031] - E_Ipc Init Done
ESTART: 0.35351 [0.00003] - E_Font Init
ESTART: 0.35968 [0.00617] - E_Font Init Done
ESTART: 0.35971 [0.00003] - E_Font Apply
ESTART: 0.36334 [0.00363] - E_Font Apply Done
ESTART: 0.36337 [0.00003] - E_Canvas Recache
ESTART: 0.36340 [0.00003] - E_Canvas Recache Done
ESTART: 0.36343 [0.00003] - E_Theme Init
ESTART: 0.36352 [0.00009] - E_Theme Init Done
ESTART: 0.36356 [0.00003] - E_Moveresize Init
ESTART: 0.36359 [0.00003] - E_Moveresize Init Done
ESTART: 0.36362 [0.00003] - E_Intl Post Init
ESTART: 0.36368 [0.00006] - E_Intl Post Init Done
ESTART: 0.36371 [0.00003] - Efreet Init
ALSA lib control.c:882:(snd_ctl_open_noupdate) Invalid CTL PandaBoardES
scenario: parse_card_controls: control PandaBoardES open retor: No such file or directory
ESTART: 0.40338 [0.03967] - Efreet Init Done
ESTART: 0.40350 [0.00012] - Screens Init
ESTART: 0.40350 [0.00000] -     screens: atoms
ESTART: 0.40387 [0.00037] -     screens: manager
ESTART: 0.40393 [0.00006] -     screens: container
ESTART: 0.40396 [0.00003] -     screens: zone
ESTART: 0.40399 [0.00003] -     screens: desk
ESTART: 0.40402 [0.00003] -     screens: menu
ESTART: 0.40405 [0.00003] -     screens: exehist
ESTART: 0.40411 [0.00006] -     screens: get roots
ESTART: 0.40414 [0.00003] -     screens: focus
ESTART: 0.40414 [0.00000] -     screens: border
ESTART: 0.40424 [0.00009] -     screens: win
ESTART: 0.40427 [0.00003] -     screens: manage roots
ALSA lib control.c:882:(snd_ctl_open_noupdate) Invalid CTL PandaBoardES
scenario: parse_card_controls: control PandaBoardES open retor: No such file or directory
ALSA lib control.c:882:(snd_ctl_open_noupdate) Invalid CTL PandaBoardES
scenario: parse_card_controls: control PandaBoardES open retor: No such file or directory
Loading volume table from file failed
set umask to old value
[/etc/rc.d/rc3.d/S20pulseaudio start]
debug level init 1(1)
W: [pulseaudio] main.c: Running in system mode, but --disallow-exit not set!
W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading not set!
N: [pulseaudio] main.c: Running in system mode, forcibly disabling SHM mode!
N: [pulseaudio] main.c: Running in system mode, forcibly disabling exit idle time!
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x17e0e8 on itself
@@@@@@@@@@ e_zone_new: 0 0 | 0 0 800x600 = 0x17c868
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x1a68d8 on itself
ESTART: 0.69775 [0.29349] -     screens: sync
ESTART: 0.70511 [0.00735] - Screens Init Done
ESTART: 0.70517 [0.00006] - E_Acpi Init
ESTART: 0.70520 [0.00003[   15.298706] OMAP ABE Media: asoc: OMAP ABE Media no valid capture route from sourk
] - E_Acpi Init Done
ESTART: 0.70523 [0.00003] - E_Backlight In[   15.313140] OMAP ABE Media: asoc: OMAP ABE Media no valid captuk
it
ESTART: 0.70[   15.323699] OMAP ABE Media: asoc: OMAP ABE Media no valid capture route from source to sink
709 [0.00186] - [   15.334075] OMAP ABE Media: asoc: OMAP ABE Media no valid capture route from source to sik
E_Backlight Init Done
ESTART: 0.70712 [0.00003] - E_Dpms Init
ESTART: 0.70743 [0.00031] - E_Dpms Init Done
ESTART: 0.70746 [0.00003] - E_Screensaver Init
ESTART: 0.70792 [0.00046] - E_Screensaver Init Done
ESTART: 0.70795 [0.00003] - E_Powersave Init
ESTART: 0.70795 [0.00000] - E_Powersave Init Done
ESTART: 0.70798 [0.00003] - E_Desklock Init
ESTART: 0.70801 [0.00003] - E_Desklock Init Done
ESTART: 0.70804 [0.00003] - E_Popups Init
ESTART: 0.70804 [0.00000] - E_Popups Init Done
ESTART: 0.70807 [0.00003] - E_Msgbus Init
ESTART: 0.71085 [0.00278] - E_Msgbus Init Done
ESTART: 0.71091 [0.00006] - Efreet Paths
ESTART: 0.71094 [0.00003] - Efreet Paths Done
ESTART: 0.71097 [0.00003] - E_Sys Init
ESTART: 0.71100 [0.00003] - E_Sys Init Done
ESTART: 0.71100 [0.00000] - E_Actions Init
ESTART: 0.71176 [0.00076] - E_Actions Init Done
ESTART: 0.71179 [0.00003] - E_Exec Init
ESTART: 0.71182 [0.00003] - E_Exec Init Done
ESTART: 0.71185 [0.00003] - E_Container Freeze
ESTART: 0.71188 [0.00003] - E_Container Freeze Done
ESTART: 0.71188 [0.00000] - E_Fm2 Init
ESTART: 0.74145 [0.02957] - E_Fm2 Init Done
ESTART: 0.74969 [0.00824] - E_Msg Init
ESTART: 0.74972 [0.00003] - E_Msg Init Done
ESTART: 0.74972 [0.00000] - E_Dnd Init
ESTART: 0.74979 [0.00006] - E_Dnd Init Done
ESTART: 0.74982 [0.00003] - E_Grabinput Init
ESTART: 0.74982 [0.00000] - E_Grabinput Init Done
ESTART: 0.74985 [0.00003] - E_Module Init
ESTART: 0.74985 [0.00000] - E_Module Init Done
ESTART: 0.74988 [0.00003] - E_Remember Init
ESTART: 0.75015 [0.00027] - E_Remember Init Done
ESTART: 0.75018 [0.00003] - E_Color_Class Init
ESTART: 0.75021 [0.00003] - E_Color_Class Init Done
ESTART: 0.75021 [0.00000] - E_Gadcon Init
ESTART: 0.75024 [0.00003] - E_Gadcon Init Done
ESTART: 0.75027 [0.00003] - E_Bg Init
ESTART: 0.75030 [0.00003] - E_Bg Init Done
ESTART: 0.75033 [0.00003] - E_Mouse Init
ESTART: 0.75067 [0.00034] - E_Mouse Init Done
ESTART: 0.75998 [0.00931] - E_Bindings Init
ESTART: 0.76025 [0.00028] - E_Bindings Init Done
ESTART: 0.76028 [0.00003] - E_Shelf Init
ESTART: 0.76028 [0.00000] - E_Shelf Init Done
ESTART: 0.76031 [0.00003] - E_Thumb Init
ESTART: 0.76034 [0.00003] - E_Thumb Init Done
ESTART: 0.76034 [0.00000] - E_Icon Init
ESTART: 0.76038 [0.00003] - E_Icon Init Done
ESTART: 0.76038 [0.00000] - E_XSettings Init
ESTART: 0.76065 [0.00027] - E_XSettings Init Done
ESTART: 0.76068 [0.00003] - E_Update Init
ESTART: 0.76074 [0.00006] - E_Update Init Done
ESTART: 0.76074 [0.00000] - E_Deskenv Init
ESTART: 0.76077 [0.00003] - E_Deskenv Init Done
ESTART: 0.76077 [0.00000] - E_Order Init
ESTART: 0.76257 [0.00180] - E_Order Init Done
ESTART: 0.76260 [0.00003] - Add Idler For X Flush
ESTART: 0.76260 [0.00000] - Add Idler For X Flush Done
ESTART: 0.76263 [0.00003] - E_Manager Keys Grab
ESTART: 0.76263 [0.00000] - E_Manager Keys Grab Done
ESTART: 0.76266 [0.00003] - Load Modules
[E17_MODULE_INFO] NAME:gadman,   ENABLE:1, DELAYED:0
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x1a6e38 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x1a8668 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x210d10 on itself
[E17_MODULE_INFO] NAME:illume2-slp,   ENABLE:1, DELAYED:0
[E17_MODULE_INFO] NAME:clock,   ENABLE:1, DELAYED:0
[E17_MODULE_INFO] NAME:e17-extra-module-keyrouter,   ENABLE:1, DELAYED:0
[keyrouter][InitModKeys] Modifier Key=XF86PowerOff (keycode:124)
[keyrouter][InitModKeys] Composited Key=XF86AudioLowerVolume (keycode:122)
[keyrouter][InitModKeys] Cancel Key=Cancel (keycode:136)
[E17_MODULE_INFO] NAME:e17-extra-module-wmready,   ENABLE:1, DELAYED:1
[E17_MODULE_INFO] NAME:ibox,   ENABLE:1, DELAYED:0
[E17_MODULE_INFO] NAME:ibar,   ENABLE:1, DELAYED:0
[E17_MODULE_INFO] NAME:conf_applications,   ENABLE:1, DELAYED:1
[E17_MODULE_INFO] NAME:conf_theme,   ENABLE:1, DELAYED:1
[E17_MODULE_INFO] NAME:comp-slp,   ENABLE:1, DELAYED:0
[COMP] nocomp_fs:0 use_hw_ov:0
ERR<1549>:evas-gl_x11 evas_x_main.c:163 eng_window_new() eglGetDisplay() fail. code=0
ERR<1549>:ecore_evas ecore_evas_x.c:254 _ecore_evas_x_gl_window_new() evas_engine_info_set() for engine 'open.
ERR<1549>:ecore_evas ecore_evas_x.c:3566 ecore_evas_gl_x11_options_new() evas_engine_info_set() init engine '.
ERR<1549>:evas-gl_x11 evas_x_main.c:163 eng_window_new() eglGetDisplay() fail. code=0
ERR<1549>:ecore_evas ecore_evas_x.c:254 _ecore_evas_x_gl_window_new() evas_engine_info_set() for engine 'open.
ERR<1549>:ecore_evas ecore_evas_x.c:3566 ecore_evas_gl_x11_options_new() evas_engine_info_set() init engine '.
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x212698 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x249d80 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x24ac48 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x24b860 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x254fd0 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x255be8 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x256800 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x257418 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x27c178 on itself
[E17_MODULE_INFO] NAME:move-slp,   ENABLE:1, DELAYED:0
[E17_MODULE_INFO] NAME:config-slp,   ENABLE:1, DELAYED:0
ERR<1549>:elementary elm_config.c:1175 _elm_config_save() Problem accessing Elementary's user configuration de
/home/developer/.elementary chown error
/home/developer/.elementary : stat error
ERR<1549>:elementary elm_config.c:1175 _elm_config_save() Problem accessing Elementary's user configuration de
/home/root/.elementary chown error
/home/root/.elementary : stat error
/bin/touch: cannot touch `/opt/etc/.profile_ready': Permission denied
[E17_MODULE_INFO] NAME:e17-extra-module-devicemgr,   ENABLE:1, DELAYED:0
[e_devicemgr] Succeed to create input_window (0x600041)!
[e_devicemgr][_e_devicemgr_init_input] XIMasterPointer (id=2, name=Virtual core pointer)
[e_devicemgr][_e_devicemgr_init_output] LVDS1 was found !
[e_devicemgr][config] Config file for e_devicemgr was loaded successfully !
ESTART: 1.06253 [0.29987] - Load Modules Done
ESTART: 1.06259 [0.00006] - Run Startup Apps
ESTART: 1.06363 [0.00104] - Run Startup Apps Done
ESTART: 1.06366 [0.00003] - E_Container Thaw
ESTART: 1.06372 [0.00006] - E_Container Thaw Done
ESTART: 1.06372 [0.00000] - E_Test Init
ESTART: 1.06375 [0.00003] - E_Test Done
ESTART: 1.06375 [0.00000] - E_Shelf Config Update
ESTART: 1.06378 [0.00003] - E_Shelf Config Update Done
ESTART: 1.06381 [0.00003] - Manage all windows
ESTART: 1.06818 [0.00436] - MAIN LOOP AT LAST
ESTART: 1.09351 [0.02533] - SLEEP
[e_devicemgr][zone_add] z->name=Zone 0, z->w=800, z->h=600, z->x=0, z->y=0
[e_devicemgr][zone_add] z->useful_geometry.w=-1, z->useful_geometry.h=-1, z->useful_geometry.x=-1, z->useful_1
[e_devicemgr][zone_add] num_zones=1
CRI<1581>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x5bbb0 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x27cd90 on itself
E_RANDR: Output event:
                : relative to win: 86
                : output (xid): 79
                : used by crtc (xid): 78
                : mode: 80
                : orientation: 1
                : connection state: CONNECTED
                : subpixel_order: 0
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x27db00 on itself
debug level init 1(1)
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2be0a8 on itself
CHANGE PW SAVE MODE TO 0 / 4
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2becc0 on itself
CRI<1581>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x5c670 on itself
CRI<1581>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x5d3e0 on itself
Re-connecting to PanelAgent server. Connected :0
ISM has been successfully launched.
CRI<1581>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2137b8 on itself
CRI<1581>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x214278 on itself
CRI<1581>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x214680 on itself
CRI<1581>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x214e90 on itself
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2bf8d8 on itself
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2bff90 on itself
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp

=========================================================================================
[WM] Active window is changed. OLD(win:0x0000000,pid:0) --> NEW(win:0x0a00009,pid:1581,name:_extn_dialog)
=========================================================================================

ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
ERR<1581>:evas_main evas_object_smart.c:747 evas_object_smart_need_recalculate_set() Object 0x5ba58 is not stp
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2bea10 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2cfc48 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2d0860 on itself
CRI<1549>:evas_main evas_clip.c:181 evas_object_clip_set() Setting clip 0x2d1478 on itself
CHANGE PW SAVE MODE TO 1 / 4
[   22.972106] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabld
[   33.036163] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabld

Reply to this post
Mark as answer
- Report
- Edit
- Delete

Shashank M

29 Jan 2014 02:13

Im using Ubuntu 12.04

When i gave sdb devices in terminal nothing is displaying.

Its not detecting any device.

Reply to this post
Mark as answer
- Report
- Edit
- Delete

User Menu

Tizen Developers

Community

Community

Responses

Search form

Languages

Responses