Hello All,
I am trying to install Tizen IVI image into IVI-ROHM StarterKit(from Giantec inc).
I am trying with IVI Installation procedure https://wiki.tizen.org/wiki/IVI/IVI_Installation with "Install system to HDD - second alternative" option.
The following are the steps in the same procedure:
- Prepare a bootable USB stick with SystemRescueCD on it. Note: they have an easy-to-use how-to on their website for this: http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick
- Copy the compressed IVI image (i.e. in bz2 format) to that USB stick
- Plug the USB stick to your IVI system
- Press "Del" or "<F2>" to access BIOS menu, change Boot Priority to make it boot from the removable USB stick
- Once you're on the console: check what your HDD (or SSD) device node is (it typically is
/dev/sda)
i am copying ivi-main-min-auto-tizen-ivi_20120712.3-sdb.raw.bz2 in step 2.
But i am not getting console as mentioned in step 5. I am getting simply bank screen.
Please help me in this installation.
Regards,
Somasekhar